Inspector BLE
$960.00
Description
The World Famous Inspector Keeps Getting Better
- Inspector BLE works with smart phones and computers across all the platforms.
- Log and Map Data
- Share Data with RadResponder, Safecast, the World, or create your own Private Network
Available With a Growing List of Accessories
- Protect (R) Boot for Rugged Environments
- Waterproof Protect (R) Enclosures for Wet Environments
- Wipe Test Plates for Sampling Air Filters or Surface Wipes
- The Rugged and Beautiful X Probe
- Wall Mount Accessories
- Wall Power Adapters
- Special Labels on Request
- Customization for your Specific Need
Contact IMI for more information
Specifications
The Inspector BLE is essentially the same instrument as our popular Inspector Alert, except that it also contains a blue tooth low energy module that is activated with a switch in the battery compartment. When activated the instrument will pair with iPhones, iPads and Android phones and tablets. Read more about our apps here.
Sensor: Halogen-quenched Geiger-Mueller tube. Effective diameter 1.75″ (45 mm). Mica window density 1.5-2.0 mg/cm²
Display: 4-digit liquid crystal display with mode indicators
Accuracy: ± 10% typical; ±15% maximum
Alert: µSv/hr: 0 to 500; mR/hr: 0 to 50; CPM: 0 to 160,000; Beeper sounds the alert
Anti-Saturation: Readout holds at full scale in fields up to 100 times the maximum reading
Audio: Beeper chirps with each radiation event (can be muted)
Averaging Periods: Display updates every 3 seconds, showing the average for the past 30-second time period at normal levels. The averaging period decreases as the radiation level increases.
Certifications: CE Certified: Emissions: EN 55011:98 + A2 (Class B emissions limits); EN 61326:06 (Class B) RF Emissions Immunity: EN 61326:06 (Annex C) Portable Test and Measurement Equipment; EN 61000-4-2:95 (ESD); EN 61000-4-3: 97; RoHS Compliant, Meets WEEE standards, and ISO 9001:2001 & ISO 14001
Count Light: Red LED flashes with each count
Detector: Halogen-quenched Geiger-Mueller tube. Effective diameter 1.75″ (45 mm). Mica window density 1.5-2.0 mg/cm² Detects Alpha, Beta, Gamma, and X-radiation
Typical Efficiency: For 4 pi at contact
Beta C-14 (49 keV avg. 156 keV max.): 5.3% Bi-210 (390 keV avg. 1.2 MeV max.): 32% Sr-90 (546 keV and 2.3 MeV): 38% P-32 (693 keV avg. 1.7 MeV max.): 33%
Alpha Am-241 (5.5 MeV): 18%
Gamma Sensitivity: 3500 CPM/mR/hr referenced to Cs-137 Smallest detectable level for I-125 is .02 mCi at contact
Manual: IMI Inspector Alert™ V2 Surface Contamination Meter
Operating Range: µSv/hr: .01 to 1,100 mR/hr: .001 to 110 CPM: 0 to 350,000 CPS: 0 to 5,000 Total: 1 to 9,999,000 counts
Options: Computer software and cable available
Ports: Output: Stereo 3.5 mm jack sends counts to computers, data loggers, other CMOS-compatible devices, earphones, and educational data collection systems. 0-9 V, 1 kOhm impedance. Input: 2.5 mm mono jack provides calibration input. 0-3.3 V, > 5 µs width, rising edge triggered.
Power: One 9-volt alkaline battery or one AA battery; battery life is typically over 2,000 hours at normal background radiation levels at sea level. Battery life decreases as radiation level rises. Battery life will be reduced when blue tooth is activated, but will still typically exceed 1,000 hours of continuous use.
Size: 150 x 80 x 30 mm (5.9″ x 3.2″ x 1.2″)
Temperature Range: -20º to +50º C , -4º to +122º F
Timer: Can set sampling periods of 1 minute to 40 hours.
Weight: 323 grams (11.4 oz) including battery
Warranty
International Medcom is passionate about quality and customer satisfaction. We provide the best radiation detector warranty available anywhere.
The Inspector BLE is covered by Medcom’s 2 year warranty on the overall instrument. The GM tube warranty is limited to 1 year. For warranty repairs customer is responsible for shipping cost to get the instrument to Medcom. Medcom will pay return shipping cost. Customer will be responsible for any customs and duty charges.
Accessories
Related Products
